Holiday Gift Ideas: Recycle and Flatten Wine Bottles To Make Cheese Plates

Categories: DIY

In my family we try to gift each other something made by us. So every year I look for inspiring ideas to create those handmade gifts. I always try to look for something that can get a second life either by recycling or upcycling and I think this year I have found just the ticket. These wine cheese plates are both beautiful and a clever way to reuse all the bottles that have been collected under the staircase.

This article is a step by step on how to make these nice gifts. It requires a kiln, but I will use my bread oven instead. There is a warning in this tutorial, please don't forget to read it and follow the instructions accordingly.

Flattening wine bottles, also known as bottle-slumping, offers a creative solution to recycle those old wine bottles that are too beautiful to toss. Once flattened, the bottles can serve as personalized wall art, colorful spoon rests and elegant serving plates. They also make a unique gift for friends or family.

<iframe width="100%" height="365" src="" frameborder="0" allowfullscreen></iframe>

Things You'll Need

  • Empty glass wine bottle
  • Large bowl (or your kitchen sink)
  • Dish soap
  • Steel wool
  • Jewelry wire, 14-gauge and 16-gauge (optional)
  • Wire cutters
  • Electric glass kiln
  • Beads (optional)

Step 1: Peel off the Labels

Peel off as much of the label as you can by hand. Try to pull off the majority of the paper, leaving the sticky residue on the bottle.

Step 2: Soak the Wine Bottle

To remove the sticky residue and leftover label, fill a large bowl or a sink with warm water. Add 10 to 12 drops of dish soap to the water and swirl your hand around in the water to evenly disperse the soap. Place the wine bottle in the soapy water and allow it to soak for 15 to 20 minutes.

Step 3: Scrub the Glue and Paper Off

Use a small piece of steel wool to gently scrub the glue and paper off from the bottle. Don't scrub so hard that the steel wool scratches the glass. After all the glue residue and paper is removed, rinse the bottle in cold water and allow it to dry completely.

Step 4: Add a Wire and Place Bottle in Kiln

If you plan on using your flattened wine bottle as wall art, cut a small piece of 14-gauge wire, twist it into a decorative shape or simply curve it and slip it into the opening of the bottle so that the top portion is still sticking out. The wire will be fused into the melted glass and will allow you to hang the flattened bottle.

Make sure the kiln is turned off and completely cool and gently place the wine bottle into the kiln.

Step 5: Melt the Bottle in the Kiln

Make sure your wine bottle is placed on the kiln shelf with the wire laying flat. Close the kiln door and turn the kiln on. Set the kiln temperature to 1,450 degrees Fahrenheit and let it slowly come up to that temperature. Once the kiln reaches 1,450 degrees, allow the bottle to sit in the kiln for one hour.

Turn the kiln off after the bottle has been in the 1,450-degree kiln for one hour, but do not open the kiln. Allow the bottle to cool in the kiln for at least 24 hours. The bottle needs to cool slowly to avoid cracking -- opening the kiln door before 24 hours will cool the bottle too quickly.


    • Do not preheat the kiln. Not only is it extremely dangerous to preheat the kiln, but if the bottle is heated too quickly, it will shatter rather than melt. 
    • Depending on the kiln you are using, you may need to place fiber paper or kiln wash on the shelf before putting your bottle in the kiln to prevent the glass from sticking to the shelf. Read the instructions on your kiln before melting the bottle.

Step 6: Remove the Bottle from the Kiln

After the kiln has been turned off for at least 24 hours, check the temperature of the kiln on the outside temperature gauge to ensure it has completely cooled. Open the kiln and remove the melted bottle.


  • If your kiln does not have a temperature gauge on the outside, wear heat-resistant gloves when removing the bottle from the kiln.

Step 7: Add Decorative Beads

Thread beads onto a piece of 16-gauge jewelry wire and wrap the wire around the neck of the bottle. Once you have your desired arrangement of beads, twist the wires tightly closed on the back of the bottle and use wire cutters to cut off the excess wire.

Your new flattened wine bottle is now ready to be hung as art or used as a one-of-a-kind cheese plate.

(Image: Kenzie Mastroe) / via eHow

  Page Turn  

Related articles in DIY